Hi,
Vmware server 3
I run 9 vms on my pc,
I have 3 identical pcs, 2 are working fine.
the newest one i built gives me (randomly) a
MONITOR PANIC: vcpu-0:VMM fault: regs=0x2e44, exc=13, eip=0xbd5e3
(always the same)
message on some of the Vms.
they then stop working.
last time it happened, 4/9 of the vms had stopped when i checked on it, 1 hour after they were started.
I am suspecting hardware issue. i have replaced motherboard, power supply, and hard drive.
leaving me with cpu and ram to go.
i have done several stress tests on the hardware, but it always passes.
my debug files are attached.
any advice would be greatly appreciated.