Greetings,

I did a bone-headed thing... I was expirementing with permissions and in one of my "test" images I added "Users role Read-Only on This object" but I didn't realize that as an "Administrator" I am also a user and that "deny" permissions supersede allow permissions. Now I have no way to go back and delete that permission on the users group! I'd happily just delete this VM from my inventory but it won't let me do that either.

How do I remove the permission or remove the VM from my inventory? This is very frustrating!

Thanks!

I have installed vmware server 2 on a pc running ubuntu 8.04. The guest Os is a Windows xp pro with service pack 3 and vmware tools installed. I'm using ARCVIEW 3.2a virtualized in this machine. Keyboard is logitech (usb).

When I work in arcview I need to select some areas. To get this I have to have pressed the shift key and I add more areas slecting them with the mouse. Everything is OK but after some seconds (10, 20, it depends) arcview starts a new selection, even when I am still pressing the shift key. It's like after some time vmware did'nt recognize that the key is still pressed.

Arcview runs perfect on others XP's in real machines.

Vmware uses a buffer to store the key pressed? can I increase the size of that buffer?

i've got a test network in place, want to dedicate a physical nic on a host to a vm so that i can do testing and not traverse my production network.

seems like there's only one "bridged" network, and i've got other vm's using that network, which gives them access to my production network, so i don't want to use that.  "nat" and "host only" don't seem to be the answer either.

can someone clarify if this can be done....

Good morning,

I have a vmware server 2.0 that is running several test servers that we want to backup.  We want to shut them down, back them up and then start them up.  We are hoping that netbackup can run this script, but I will worry about that part later.  I was trying to use vmrun to do this but I always get this error.

Error: Malformed hostname parameter.  For the given service provider, the hostname must be a URL, in the form https://<hostname>:<port>/sdk

Then, I tried putting the https address in there and I get a cannot connect to host error.  I'm not sure if I have the right address or not.  Has anybody done this before?

Thanks for any help,

Tim

Since I have upgraded to;

Linux suse10.3 2.6.22.19-0.4-default #1 SMP 2009-08-14 02:09:16 +0200 i686 i686 i386 GNU/Linux

Everytime I reboot the server  it requires that I run /usr/bin/vmware-config.pl and recompile everything.  All appears to function correctly after the recompile and I don't receive any errors during the compile.

Vmware config

guest.commands.enabledonhost = "TRUE"

vmnet1.hostonlyaddress = "172.16.144.1"

authd.client.port = "9000"

authd.proxy.nfc = "vmware-hostd:ha-nfc"

loop.fullpath = "/usr/bin/vmware-loop"

guest.commands.anonguestpasswordonhost = ""

product.buildnumber = "156745"

vmnet1.hostonlynetmask = "255.255.255.0"

authd.proxy.vim = "vmware-hostd:hostd-vmdb"

bindir = "/usr/bin"

dhcpd.fullpath = "/usr/bin/vmnet-dhcpd"

guest.commands.anonguestusernameonhost = ""

control.fullpath = "/usr/bin/vmware-cmd"

product.version = "2.0.1"

authd.fullpath = "/usr/sbin/vmware-authd"

guest.commands.allowanonrootguestcommandsonhost = "FALSE"

vmware.fullpath = "/usr/bin/vmware"

libdir = "/usr/lib/vmware"

guest.commands.allowanonguestcommandsonhost = "FALSE"

vmdir = "/vmimages"

authd.soapserver = "TRUE"

product.name = "VMware Server"

vix.libdir = "/usr/lib/vmware-vix/lib"

Vmware locations

file /etc/vmware/locations

answer INITDIR /etc/init.d

answer INITSCRIPTSDIR /etc/init.d

answer NETWORKING yes

answer ICONDIR /usr/share/icons

answer DESKTOPDIR /usr/share/applications

answer PIXMAPDIR /usr/share/pixmaps

answer BINDIR /usr/bin

answer SBINDIR /usr/sbin

answer LIBDIR /usr/lib/vmware

answer DOCDIR /usr/share/doc/vmware

answer MANDIR /usr/share/man

answer VNET_0_NAME Bridged-0

answer HTTP_PROXY_PORT 8222

answer HTTPS_PROXY_PORT 8333

answer EULA_AGREED yes

answer BUILDR_vmmon yes

answer HEADER_DIR /lib/modules/2.6.22.19-0.4-default/build/include

answer BUILDR_vmci yes

answer VMCI_CONFED yes

answer BUILDR_vsock yes

answer VSOCK_CONFED yes

answer VNET_0_INTERFACE eth1

answer VNET_1_HOSTONLY_HOSTADDR 172.16.144.1

answer VNET_1_HOSTONLY_NETMASK 255.255.255.0

answer VNET_1_HOSTONLY_SUBNET 172.16.144.0

answer VNET_1_DHCP yes

answer VNET_8_NAT yes

answer VNET_8_HOSTONLY_HOSTADDR 192.168.170.1

answer VNET_8_HOSTONLY_NETMASK 255.255.255.0

answer VNET_8_HOSTONLY_SUBNET 192.168.170.0

answer VNET_8_DHCP yes

answer NETWORKING_SKIP_SETUP yes

answer BUILDR_vmnet yes

answer AUTHDPORT 9000

answer VMAUTHD_USE_LAUNCHER yes

answer USE_CURRENT_PORTS yes

answer VMDIR /vmimages

file /etc/vmware/state/config 1251034044

remove_answer BINDIR

answer BINDIR /usr/bin

remove_answer SBINDIR

answer SBINDIR /usr/sbin

remove_answer LIBDIR

answer LIBDIR /usr/lib/vmware

remove_answer DOCDIR

answer DOCDIR /usr/share/doc/vmware

remove_answer MANDIR

answer MANDIR /usr/share/man

file /etc/vmware/not_configured 1251034155

file /etc/init.d/vmware 1251034156

remove_answer EULA_AGREED

answer INSTALL_CYCLE yes

file /etc/init.d/vmware-mgmt

file /etc/init.d/vmware-core

file /etc/init.d/vmware-autostart

file /etc/vmware/icu

answer EULA_AGREED yes

remove_answer BUILDR_vmmon

answer BUILDR_vmmon yes

remove_answer HEADER_DIR

answer HEADER_DIR /lib/modules/2.6.22.19-0.4-default/build/include

directory /lib/modules/2.6.22.19-0.4-default/misc

file /lib/modules/2.6.22.19-0.4-default/misc/vmmon.o 1252061965

file /lib/modules/2.6.22.19-0.4-default/misc/vmmon.ko

remove_answer BUILDR_vmci

answer BUILDR_vmci yes

file /lib/modules/2.6.22.19-0.4-default/misc/vmci.o 1252061976

file /lib/modules/2.6.22.19-0.4-default/misc/vmci.ko

remove_answer VMCI_CONFED

answer VMCI_CONFED yes

remove_answer BUILDR_vsock

answer BUILDR_vsock yes

file /lib/modules/2.6.22.19-0.4-default/misc/vsock.o 1252061982

file /lib/modules/2.6.22.19-0.4-default/misc/vsock.ko

remove_answer VSOCK_CONFED

answer VSOCK_CONFED yes

remove_answer VNET_0_INTERFACE

answer VNET_0_INTERFACE eth1

file /dev/vmnet0

file /dev/vmnet1

remove_answer VNET_1_HOSTONLY_HOSTADDR

answer VNET_1_HOSTONLY_HOSTADDR 172.16.144.1

remove_answer VNET_1_HOSTONLY_NETMASK

answer VNET_1_HOSTONLY_NETMASK 255.255.255.0

remove_answer VNET_1_HOSTONLY_SUBNET

answer VNET_1_HOSTONLY_SUBNET 172.16.144.0

remove_answer VNET_1_DHCP

answer VNET_1_DHCP yes

directory /etc/vmware/vmnet1

directory /etc/vmware/vmnet1/dhcpd

file /etc/vmware/vmnet1/dhcpd/dhcpd.conf 1252061982

config /etc/vmware/vmnet1/dhcpd/dhcpd.conf

file /etc/vmware/vmnet1/dhcpd/dhcpd.leases

file /etc/vmware/vmnet1/dhcpd/dhcpd.leases~

file /dev/vmnet8

remove_answer VNET_8_NAT

answer VNET_8_NAT yes

remove_answer VNET_8_HOSTONLY_HOSTADDR

answer VNET_8_HOSTONLY_HOSTADDR 192.168.170.1

remove_answer VNET_8_HOSTONLY_NETMASK

answer VNET_8_HOSTONLY_NETMASK 255.255.255.0

remove_answer VNET_8_HOSTONLY_SUBNET

answer VNET_8_HOSTONLY_SUBNET 192.168.170.0

remove_answer VNET_8_DHCP

answer VNET_8_DHCP yes

directory /etc/vmware/vmnet8

directory /etc/vmware/vmnet8/dhcpd

file /etc/vmware/vmnet8/dhcpd/dhcpd.conf 1252061982

config /etc/vmware/vmnet8/dhcpd/dhcpd.conf

file /etc/vmware/vmnet8/dhcpd/dhcpd.leases

file /etc/vmware/vmnet8/dhcpd/dhcpd.leases~

directory /etc/vmware/vmnet8/nat

file /etc/vmware/vmnet8/nat/nat.conf 1252061982

config /etc/vmware/vmnet8/nat/nat.conf

remove_answer NETWORKING_SKIP_SETUP

answer NETWORKING_SKIP_SETUP yes

remove_answer BUILDR_vmnet

answer BUILDR_vmnet yes

file /lib/modules/2.6.22.19-0.4-default/misc/vmnet.o 1252061995

file /lib/modules/2.6.22.19-0.4-default/misc/vmnet.ko

remove_answer AUTHDPORT

answer AUTHDPORT 9000

remove_answer VMAUTHD_USE_LAUNCHER

answer VMAUTHD_USE_LAUNCHER yes

directory /etc/vmware/ssl

file /etc/vmware/ssl/rui.key 1252061996

file /etc/vmware/ssl/rui.crt 1252061996

file /etc/vmware/hostd/config.xml 1252061997

config /etc/vmware/hostd/config.xml

remove_answer USE_CURRENT_PORTS

answer USE_CURRENT_PORTS yes

file /etc/vmware/hostd/proxy.xml 1252061998

config /etc/vmware/hostd/proxy.xml

file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/jslib-1.0.128374-debug/modules/com.vmware.webaccess.app_1.0.0/WebAccess.properties 1252061998

config /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/jslib-1.0.128374-debug/modules/com.vmware.webaccess.app_1.0.0/WebAccess.properties

file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/jslib-1.0.128374/modules/com.vmware.webaccess.app_1.0.0/WebAccess.properties 1252061998

config /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/jslib-1.0.128374/modules/com.vmware.webaccess.app_1.0.0/WebAccess.properties

file /etc/vmware/hostd/NEW_authorization.xml 1252062001

config /etc/vmware/hostd/NEW_authorization.xml

file /etc/vmware/hostd/NEW_vmInventory.xml 1252062001

config /etc/vmware/hostd/NEW_vmInventory.xml

file /usr/lib/vmware/hostd/docroot/client/clients.xml 1252062002

config /usr/lib/vmware/hostd/docroot/client/clients.xml

directory /etc/vmware/webAccess

file /etc/vmware/webAccess/log4j.properties

file /etc/vmware/webAccess/proxy.properties

file /etc/vmware/webAccess/login.properties

remove_file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/conf/tomcat-users.xml

file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/conf/tomcat-users.xml

file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/logs

file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/work

file /etc/init.d/rc2.d/S19vmware

file /etc/init.d/rc2.d/K08vmware

file /etc/init.d/rc3.d/S19vmware

file /etc/init.d/rc3.d/K08vmware

file /etc/init.d/rc5.d/S19vmware

file /etc/init.d/rc5.d/K08vmware

file /etc/init.d/rc0.d/K08vmware

file /etc/init.d/rc6.d/K08vmware

remove_answer VMDIR

answer VMDIR /vmimages

file /etc/vmware/hostd/NEW_datastores.xml 1252062003

config /etc/vmware/hostd/NEW_datastores.xml

file /etc/vmware/config 1252062003

config /etc/vmware/config

remove_answer EULA_AGREED

remove_answer INSTALL_CYCLE

remove_file /etc/vmware/icu

file /etc/vmware/icu

remove_file /etc/vmware/not_configured

file /etc/vmware/not_configured 1252284635

remove_file /etc/vmware/icu

file /etc/vmware/icu

answer EULA_AGREED yes

remove_answer BUILDR_vmmon

answer BUILDR_vmmon yes

remove_answer HEADER_DIR

answer HEADER_DIR /lib/modules/2.6.22.19-0.4-default/build/include

remove_file /lib/modules/2.6.22.19-0.4-default/misc/vmmon.o

file /lib/modules/2.6.22.19-0.4-default/misc/vmmon.o 1253366885

remove_file /lib/modules/2.6.22.19-0.4-default/misc/vmmon.ko

file /lib/modules/2.6.22.19-0.4-default/misc/vmmon.ko

remove_answer BUILDR_vmci

answer BUILDR_vmci yes

remove_file /lib/modules/2.6.22.19-0.4-default/misc/vmci.o

file /lib/modules/2.6.22.19-0.4-default/misc/vmci.o 1253366896

remove_file /lib/modules/2.6.22.19-0.4-default/misc/vmci.ko

file /lib/modules/2.6.22.19-0.4-default/misc/vmci.ko

remove_answer VMCI_CONFED

answer VMCI_CONFED yes

remove_answer BUILDR_vsock

answer BUILDR_vsock yes

remove_file /lib/modules/2.6.22.19-0.4-default/misc/vsock.o

file /lib/modules/2.6.22.19-0.4-default/misc/vsock.o 1253366901

remove_file /lib/modules/2.6.22.19-0.4-default/misc/vsock.ko

file /lib/modules/2.6.22.19-0.4-default/misc/vsock.ko

remove_answer VSOCK_CONFED

answer VSOCK_CONFED yes

remove_answer VNET_0_INTERFACE

answer VNET_0_INTERFACE eth1

remove_file /dev/vmnet0

file /dev/vmnet0

remove_file /dev/vmnet1

file /dev/vmnet1

remove_answer VNET_1_HOSTONLY_HOSTADDR

answer VNET_1_HOSTONLY_HOSTADDR 172.16.144.1

remove_answer VNET_1_HOSTONLY_NETMASK

answer VNET_1_HOSTONLY_NETMASK 255.255.255.0

remove_answer VNET_1_HOSTONLY_SUBNET

answer VNET_1_HOSTONLY_SUBNET 172.16.144.0

remove_answer VNET_1_DHCP

answer VNET_1_DHCP yes

remove_file /etc/vmware/vmnet1/dhcpd/dhcpd.conf

file /etc/vmware/vmnet1/dhcpd/dhcpd.conf 1253366901

config /etc/vmware/vmnet1/dhcpd/dhcpd.conf

remove_file /etc/vmware/vmnet1/dhcpd/dhcpd.leases

file /etc/vmware/vmnet1/dhcpd/dhcpd.leases

remove_file /etc/vmware/vmnet1/dhcpd/dhcpd.leases~

file /etc/vmware/vmnet1/dhcpd/dhcpd.leases~

remove_file /dev/vmnet8

file /dev/vmnet8

remove_answer VNET_8_NAT

answer VNET_8_NAT yes

remove_answer VNET_8_HOSTONLY_HOSTADDR

answer VNET_8_HOSTONLY_HOSTADDR 192.168.170.1

remove_answer VNET_8_HOSTONLY_NETMASK

answer VNET_8_HOSTONLY_NETMASK 255.255.255.0

remove_answer VNET_8_HOSTONLY_SUBNET

answer VNET_8_HOSTONLY_SUBNET 192.168.170.0

remove_answer VNET_8_DHCP

answer VNET_8_DHCP yes

remove_file /etc/vmware/vmnet8/dhcpd/dhcpd.conf

file /etc/vmware/vmnet8/dhcpd/dhcpd.conf 1253366902

config /etc/vmware/vmnet8/dhcpd/dhcpd.conf

remove_file /etc/vmware/vmnet8/dhcpd/dhcpd.leases

file /etc/vmware/vmnet8/dhcpd/dhcpd.leases

remove_file /etc/vmware/vmnet8/dhcpd/dhcpd.leases~

file /etc/vmware/vmnet8/dhcpd/dhcpd.leases~

remove_file /etc/vmware/vmnet8/nat/nat.conf

file /etc/vmware/vmnet8/nat/nat.conf 1253366902

config /etc/vmware/vmnet8/nat/nat.conf

remove_answer NETWORKING_SKIP_SETUP

answer NETWORKING_SKIP_SETUP yes

remove_answer BUILDR_vmnet

answer BUILDR_vmnet yes

remove_file /lib/modules/2.6.22.19-0.4-default/misc/vmnet.o

file /lib/modules/2.6.22.19-0.4-default/misc/vmnet.o 1253366914

remove_file /lib/modules/2.6.22.19-0.4-default/misc/vmnet.ko

file /lib/modules/2.6.22.19-0.4-default/misc/vmnet.ko

remove_answer AUTHDPORT

answer AUTHDPORT 9000

remove_answer VMAUTHD_USE_LAUNCHER

answer VMAUTHD_USE_LAUNCHER yes

file /etc/vmware/hostd/NEW_config.xml 1253366916

config /etc/vmware/hostd/NEW_config.xml

remove_answer USE_CURRENT_PORTS

answer USE_CURRENT_PORTS yes

remove_file /etc/vmware/hostd/proxy.xml

file /etc/vmware/hostd/proxy.xml 1253366917

config /etc/vmware/hostd/proxy.xml

remove_file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/jslib-1.0.128374-debug/modules/com.vmware.webaccess.app_1.0.0/WebAccess.properties

file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/jslib-1.0.128374-debug/modules/com.vmware.webaccess.app_1.0.0/WebAccess.properties 1253366917

config /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/jslib-1.0.128374-debug/modules/com.vmware.webaccess.app_1.0.0/WebAccess.properties

remove_file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/jslib-1.0.128374/modules/com.vmware.webaccess.app_1.0.0/WebAccess.properties

file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/jslib-1.0.128374/modules/com.vmware.webaccess.app_1.0.0/WebAccess.properties 1253366917

config /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/jslib-1.0.128374/modules/com.vmware.webaccess.app_1.0.0/WebAccess.properties

remove_file /etc/vmware/hostd/NEW_authorization.xml

file /etc/vmware/hostd/NEW_authorization.xml 1253366918

config /etc/vmware/hostd/NEW_authorization.xml

remove_file /etc/vmware/hostd/NEW_vmInventory.xml

file /etc/vmware/hostd/NEW_vmInventory.xml 1253366918

config /etc/vmware/hostd/NEW_vmInventory.xml

file /usr/lib/vmware/hostd/docroot/client/NEW_clients.xml 1253366918

config /usr/lib/vmware/hostd/docroot/client/NEW_clients.xml

remove_file /etc/vmware/webAccess/log4j.properties

file /etc/vmware/webAccess/log4j.properties

remove_file /etc/vmware/webAccess/proxy.properties

file /etc/vmware/webAccess/proxy.properties

remove_file /etc/vmware/webAccess/login.properties

file /etc/vmware/webAccess/login.properties

remove_file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/conf/tomcat-users.xml

file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/conf/tomcat-users.xml

remove_file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/logs

file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/logs

remove_file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/work

file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/work

remove_file /etc/init.d/rc2.d/S19vmware

file /etc/init.d/rc2.d/S19vmware

remove_file /etc/init.d/rc2.d/K08vmware

file /etc/init.d/rc2.d/K08vmware

remove_file /etc/init.d/rc3.d/S19vmware

file /etc/init.d/rc3.d/S19vmware

remove_file /etc/init.d/rc3.d/K08vmware

file /etc/init.d/rc3.d/K08vmware

remove_file /etc/init.d/rc5.d/S19vmware

file /etc/init.d/rc5.d/S19vmware

remove_file /etc/init.d/rc5.d/K08vmware

file /etc/init.d/rc5.d/K08vmware

remove_file /etc/init.d/rc0.d/K08vmware

file /etc/init.d/rc0.d/K08vmware

remove_file /etc/init.d/rc6.d/K08vmware

file /etc/init.d/rc6.d/K08vmware

remove_file /etc/vmware/config

remove_answer VMDIR

answer VMDIR /vmimages

remove_file /etc/vmware/hostd/NEW_datastores.xml

file /etc/vmware/hostd/NEW_datastores.xml 1253366920

config /etc/vmware/hostd/NEW_datastores.xml

file /etc/vmware/config 1253366920

config /etc/vmware/config

remove_file /etc/vmware/icu

file /etc/vmware/icu

remove_file /etc/vmware/not_configured

Boot Log

Inspecting /boot/System.map-2.6.22.19-0.4-default

Loaded 26170 symbols from /boot/System.map-2.6.22.19-0.4-default.

Symbols match kernel version 2.6.22.

No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.

&lt;5&gt;Linux version 2.6.22.19-0.4-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2009-08-14 02:09:16 +0200

&lt;6&gt;BIOS-provided physical RAM map:

&lt;4&gt; BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

&lt;4&gt; BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

&lt;4&gt; BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

&lt;4&gt; BIOS-e820: 0000000000100000 - 000000008fffc000 (usable)

&lt;4&gt; BIOS-e820: 000000008fffc000 - 000000008ffff000 (ACPI data)

&lt;4&gt; BIOS-e820: 000000008ffff000 - 0000000090000000 (ACPI NVS)

&lt;4&gt; BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

&lt;4&gt; BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

&lt;4&gt; BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)

&lt;5&gt;1407MB HIGHMEM available.

&lt;5&gt;896MB LOWMEM available.

&lt;7&gt;Entering add_active_range(0, 0, 589820) 0 entries of 256 used

&lt;4&gt;Zone PFN ranges:

&lt;4&gt;  DMA             0 -&gt;     4096

&lt;4&gt;  Normal       4096 -&gt;   229376

&lt;4&gt;  HighMem    229376 -&gt;   589820

&lt;4&gt;early_node_map[1] active PFN ranges

&lt;4&gt;    0:        0 -&gt;   589820

&lt;7&gt;On node 0 totalpages: 589820

&lt;7&gt;  DMA zone: 32 pages used for memmap

&lt;7&gt;  DMA zone: 0 pages reserved

&lt;7&gt;  DMA zone: 4064 pages, LIFO batch:0

&lt;7&gt;  Normal zone: 1760 pages used for memmap

&lt;7&gt;  Normal zone: 223520 pages, LIFO batch:31

&lt;7&gt;  HighMem zone: 2815 pages used for memmap

&lt;7&gt;  HighMem zone: 357629 pages, LIFO batch:31

&lt;6&gt;DMI 2.3 present.

&lt;6&gt;Using APIC driver default

&lt;4&gt;ACPI: RSDP 000F6850, 0014 (r0 ASUS  )

&lt;4&gt;ACPI: RSDT 8FFFC000, 002C (r1 ASUS   P4S333   42302E31 MSFT 31313031)

&lt;4&gt;ACPI: FACP 8FFFC100, 0074 (r1 ASUS   P4S333   42302E31 MSFT 31313031)

&lt;4&gt;ACPI: DSDT 8FFFC180, 255D (r1   ASUS P4S333       1000 MSFT  100000B)

&lt;4&gt;ACPI: FACS 8FFFF000, 0040

&lt;4&gt;ACPI: BOOT 8FFFC040, 0028 (r1 ASUS   P4S333   42302E31 MSFT 31313031)

&lt;6&gt;ACPI: PM-Timer IO Port: 0xe408

&lt;4&gt;Allocating PCI resources starting at 98000000 (gap: 90000000:6ec00000)

&lt;4&gt;Built 1 zonelists.  Total pages: 585213

&lt;5&gt;Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 vga=0x31a resume=/dev/sda1 splash=silent

&lt;6&gt;bootsplash: silent mode.

&lt;6&gt;Found and enabled local APIC!

&lt;7&gt;mapped APIC to ffffd000 (fee00000)

&lt;6&gt;Enabling fast FPU save and restore... done.

&lt;6&gt;Enabling unmasked SIMD FPU exception support... done.

&lt;6&gt;Initializing CPU#0

&lt;4&gt;PID hash table entries: 4096 (order: 12, 16384 bytes)

&lt;4&gt;Detected 1816.289 MHz processor.

&lt;4&gt;Console: colour dummy device 80x25

&lt;4&gt;Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

&lt;4&gt;Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

&lt;6&gt;Memory: 2331336k/2359280k available (1831k kernel code, 26720k reserved, 766k data, 228k init, 1441776k highmem)

&lt;4&gt;virtual kernel memory layout:

&lt;4&gt;    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)

&lt;4&gt;    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)

&lt;4&gt;    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)

&lt;4&gt;    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)

&lt;4&gt;      .init : 0xc0390000 - 0xc03c9000   ( 228 kB)

&lt;4&gt;      .data : 0xc02c9ef1 - 0xc0389964   ( 766 kB)

&lt;4&gt;      .text : 0xc0100000 - 0xc02c9ef1   (1831 kB)

&lt;4&gt;Checking if this processor honours the WP bit even in supervisor mode... Ok.

&lt;4&gt;Calibrating delay using timer specific routine.. 3635.99 BogoMIPS (lpj=7271986)

&lt;6&gt;Security Framework v1.0.0 initialized

&lt;4&gt;Mount-cache hash table entries: 512

&lt;7&gt;CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000

&lt;6&gt;CPU: Trace cache: 12K uops, L1 D cache: 8K

&lt;6&gt;CPU: L2 cache: 512K

&lt;6&gt;CPU: Hyper-Threading is disabled

&lt;7&gt;CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000

&lt;6&gt;Intel machine check architecture supported.

&lt;6&gt;Intel machine check reporting enabled on CPU#0.

&lt;6&gt;CPU0: Intel P4/Xeon Extended MCE MSRs (12) available

&lt;6&gt;CPU0: Thermal monitoring enabled

&lt;4&gt;Compat vDSO mapped to ffffe000.

&lt;6&gt;Checking 'hlt' instruction... OK.

&lt;6&gt;SMP alternatives: switching to UP code

&lt;6&gt;Freeing SMP alternatives: 12k freed

&lt;6&gt;Unpacking initramfs... done

&lt;6&gt;Freeing initrd memory: 4056k freed

&lt;6&gt;ACPI: Core revision 20070126

&lt;4&gt;Parsing all Control Methods:

&lt;4&gt;Table (id 0001) - 303 Objects with 44 Devices 116 Methods 8 Regions

&lt;4&gt; tbxface-0587 tb_load_namespace     : ACPI Tables successfully acquired

&lt;4&gt;ACPI: setting ELCR to 0200 (from 0ca0)

&lt;4&gt;evxfevnt-0091 enable                : Transition to ACPI mode successful

&lt;4&gt;CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04

&lt;5&gt;SMP motherboard not detected.

&lt;6&gt;Brought up 1 CPUs

&lt;6&gt;Booting paravirtualized kernel on bare hardware

&lt;6&gt;NET: Registered protocol family 16

&lt;6&gt;ACPI: bus type pci registered

&lt;6&gt;PCI: PCI BIOS revision 2.10 entry at 0xf15b0, last bus=1

&lt;6&gt;PCI: Using configuration type 1

&lt;4&gt;Setting up standard PCI resources

&lt;4&gt;evgpeblk-0956 ev_create_gpe_block   : GPE 00 to 0F 2 regs on int 0x9

&lt;4&gt;evgpeblk-1052 ev_initialize_gpe_bloc: Found 5 Wake, Enabled 1 Runtime GPEs in this block

&lt;7&gt;ACPI: EC: Look up EC in DSDT

&lt;4&gt;Completing Region/Field/Buffer/Package initialization:....................................

&lt;4&gt;Initialized 4/8 Regions 0/0 Fields 21/21 Buffers 11/11 Packages (312 nodes)

&lt;4&gt;Initializing Device/Processor/Thermal objects by executing _INI methods:

&lt;4&gt;Executed 0 _INI methods requiring 0 _STA executions (examined 47 objects)

&lt;6&gt;ACPI: Interpreter enabled

&lt;6&gt;ACPI: (supports S0 S1 S4 S5)

&lt;6&gt;ACPI: Using PIC for interrupt routing

&lt;6&gt;ACPI: PCI Root Bridge (0000:00)

&lt;7&gt;PCI: Probing PCI hardware (bus 00)

&lt;6&gt;Enabling SiS 96x SMBus.

&lt;7&gt;ACPI: PCI Interrupt Routing Table http://\_SB_.PCI0._PRT

&lt;7&gt;ACPI: PCI Interrupt Routing Table http://\_SB_.PCI0.PCI1._PRT

&lt;4&gt;ACPI: PCI Interrupt Link (IRQs 3 4 5 6 7 10 *11 12 14 15)

&lt;4&gt;ACPI: PCI Interrupt Link (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

&lt;4&gt;ACPI: PCI Interrupt Link (IRQs 3 4 5 6 7 *10 11 12 14 15)

&lt;4&gt;ACPI: PCI Interrupt Link (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

&lt;4&gt;ACPI: PCI Interrupt Link (IRQs 3 4 5 6 *7 10 11 12 14 15)

&lt;4&gt;ACPI: PCI Interrupt Link (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

&lt;4&gt;ACPI: PCI Interrupt Link (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

&lt;4&gt;ACPI: PCI Interrupt Link (IRQs 3 4 *5 6 7 10 11 12 14 15)

&lt;6&gt;Linux Plug and Play Support v0.97 (c) Adam Belay

&lt;6&gt;pnp: PnP ACPI init

&lt;6&gt;ACPI: bus type pnp registered

&lt;6&gt;pnp: PnP ACPI: found 14 devices

&lt;6&gt;ACPI: ACPI bus type pnp unregistered

&lt;6&gt;PnPBIOS: Disabled by ACPI PNP

&lt;6&gt;PCI: Using ACPI for IRQ routing

&lt;6&gt;PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

&lt;4&gt;ACPI: RTC can wake from S4

&lt;6&gt;pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved

&lt;6&gt;pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved

&lt;6&gt;pnp: 00:00: iomem range 0x100000-0x8fffffff could not be reserved

&lt;6&gt;pnp: 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved

&lt;6&gt;pnp: 00:02: ioport range 0xe400-0xe47f has been reserved

&lt;6&gt;pnp: 00:02: ioport range 0xe480-0xe4ff has been reserved

&lt;6&gt;pnp: 00:02: ioport range 0xe600-0xe61f has been reserved

&lt;6&gt;pnp: 00:02: ioport range 0x480-0x48f has been reserved

&lt;6&gt;pnp: 00:02: iomem range 0xffee0000-0xffefffff has been reserved

&lt;6&gt;pnp: 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved

&lt;6&gt;pnp: 00:0d: ioport range 0x3f0-0x3f1 has been reserved

&lt;6&gt;Time: tsc clocksource has been installed.

&lt;6&gt;PCI: Bridge: 0000:00:01.0

&lt;6&gt;  IO window: disabled.

&lt;6&gt;  MEM window: e7000000-e7ffffff

&lt;6&gt;  PREFETCH window: eff00000-febfffff

&lt;7&gt;PCI: Setting latency timer of device 0000:00:01.0 to 64

&lt;6&gt;NET: Registered protocol family 2

&lt;4&gt;IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

&lt;4&gt;TCP established hash table entries: 131072 (order: 8, 1572864 bytes)

&lt;4&gt;TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

&lt;6&gt;TCP: Hash tables configured (established 131072 bind 65536)

&lt;6&gt;TCP reno registered

&lt;6&gt;Simple Boot Flag at 0x3a set to 0x1

&lt;6&gt;Machine check exception polling timer started.

&lt;6&gt;audit: initializing netlink socket (disabled)

&lt;5&gt;audit(1252274576.400:1): initialized

&lt;4&gt;highmem bounce pool size: 64 pages

&lt;4&gt;Total HugeTLB memory allocated, 0

&lt;5&gt;VFS: Disk quotas dquot_6.5.1

&lt;4&gt;Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

&lt;6&gt;io scheduler noop registered

&lt;6&gt;io scheduler anticipatory registered

&lt;6&gt;io scheduler deadline registered

&lt;6&gt;io scheduler cfq registered (default)

&lt;7&gt;Boot video device is 0000:01:00.0

&lt;6&gt;vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 65536k

&lt;6&gt;vesafb: mode is 1280x1024x16, linelength=2560, pages=1

&lt;6&gt;vesafb: protected mode interface info at c000:c210

&lt;6&gt;vesafb: pmi: set display start = c00cc255, set palette = c00cc2da

&lt;6&gt;vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03

&lt;6&gt;vesafb: scrolling: redraw

&lt;6&gt;vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

&lt;6&gt;bootsplash 3.1.6-2004/03/31: looking for picture...

&lt;6&gt;bootsplash: silentjpeg size 98233 bytes

&lt;6&gt;bootsplash: ...found (1280x1024, 35219 bytes, v3).

&lt;4&gt;Console: switching to colour frame buffer device 156x60

&lt;6&gt;fb0: VESA VGA frame buffer device

&lt;6&gt;isapnp: Scanning for PnP cards...

&lt;6&gt;Switched to NOHz mode on CPU #0

&lt;6&gt;isapnp: No Plug & Play device found

&lt;6&gt;Real Time Clock Driver v1.12ac

&lt;6&gt;Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

&lt;6&gt;serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

&lt;6&gt;00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

&lt;6&gt;Floppy drive(s): fd0 is 1.44M

&lt;6&gt;FDC 0 is a post-1991 82077

&lt;6&gt;PNP: PS/2 Controller at 0x60,0x64 irq 1,12

&lt;6&gt;serio: i8042 KBD port at 0x60,0x64 irq 1

&lt;6&gt;serio: i8042 AUX port at 0x60,0x64 irq 12

&lt;6&gt;mice: PS/2 mouse device common for all mice

&lt;6&gt;input: AT Translated Set 2 keyboard as /class/input/input0

&lt;6&gt;input: PC Speaker as /class/input/input1

&lt;6&gt;input: GenPS/2 Genius Mouse as /class/input/input2

&lt;6&gt;NET: Registered protocol family 1

&lt;6&gt;Testing NMI watchdog ... OK.

&lt;4&gt;Using IPI No-Shortcut mode

&lt;6&gt;Freeing unused kernel memory: 228k freed

&lt;3&gt;ACPI: Invalid PBLK length

&lt;5&gt;SCSI subsystem initialized

&lt;7&gt;libata version 3.00 loaded.

&lt;7&gt;pata_sis 0000:00:02.5: version 0.5.2

&lt;6&gt;scsi0 : pata_sis

&lt;6&gt;scsi1 : pata_sis

&lt;6&gt;ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001d800 irq 14

&lt;6&gt;ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001d808 irq 15

&lt;6&gt;ata1.00: ATA-5: WDC WD1200BB-00CAA0, 16.06V16, max UDMA/100

&lt;6&gt;ata1.00: 234441648 sectors, multi 16: LBA

&lt;6&gt;ata1.01: ATA-6: ST340810A, 3.35, max UDMA/100

&lt;6&gt;ata1.01: 78165360 sectors, multi 16: LBA

&lt;6&gt;ata1.00: configured for UDMA/100

&lt;6&gt;ata1.01: configured for UDMA/100

&lt;6&gt;ata2.00: ATAPI: LITE-ON DVDRW SOHW-1673S, JS0D, max UDMA/66

&lt;6&gt;ata2.00: configured for UDMA/66

&lt;5&gt;scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BB-00C 16.0 PQ: 0 ANSI: 5

&lt;5&gt;scsi 0:0:1:0: Direct-Access     ATA      ST340810A        3.35 PQ: 0 ANSI: 5

&lt;5&gt;scsi 1:0:0:0: CD-ROM            LITE-ON  DVDRW SOHW-1673S JS0D PQ: 0 ANSI: 5

&lt;6&gt;BIOS EDD facility v0.16 2004-Jun-25, 2 devices found

&lt;6&gt;usbcore: registered new interface driver usbfs

&lt;6&gt;usbcore: registered new interface driver hub

&lt;6&gt;usbcore: registered new device driver usb

&lt;7&gt;ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver

&lt;4&gt;ACPI: PCI Interrupt Link enabled at IRQ 7

&lt;7&gt;PCI: setting IRQ 7 as level-triggered

&lt;6&gt;ACPI: PCI Interrupt 0000:00:02.2[D] -&gt; Link -&gt; GSI 7 (level, low) -&gt; IRQ 7

&lt;6&gt;ohci_hcd 0000:00:02.2: OHCI Host Controller

&lt;6&gt;ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1

&lt;6&gt;ohci_hcd 0000:00:02.2: irq 7, io mem 0xe6800000

&lt;6&gt;usb usb1: new device found, idVendor=0000, idProduct=0000

&lt;6&gt;usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1

&lt;6&gt;usb usb1: Product: OHCI Host Controller

&lt;6&gt;usb usb1: Manufacturer: Linux 2.6.22.19-0.4-default ohci_hcd

&lt;6&gt;usb usb1: SerialNumber: 0000:00:02.2

&lt;6&gt;usb usb1: configuration #1 chosen from 1 choice

&lt;6&gt;hub 1-0:1.0: USB hub found

&lt;6&gt;hub 1-0:1.0: 3 ports detected

&lt;5&gt;sd 0:0:0:0: 234441648 512-byte hardware sectors (120034 MB)

&lt;5&gt;sd 0:0:0:0: Write Protect is off

&lt;7&gt;sd 0:0:0:0: Mode Sense: 00 3a 00 00

&lt;5&gt;sd 0:0:0:0: Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

&lt;5&gt;sd 0:0:0:0: 234441648 512-byte hardware sectors (120034 MB)

&lt;4&gt;ACPI: PCI Interrupt Link enabled at IRQ 5

&lt;7&gt;PCI: setting IRQ 5 as level-triggered

&lt;6&gt;ACPI: PCI Interrupt 0000:00:02.3[A] -&gt; Link -&gt; GSI 5 (level, low) -&gt; IRQ 5

&lt;6&gt;ohci_hcd 0000:00:02.3: OHCI Host Controller

&lt;6&gt;ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2

&lt;6&gt;ohci_hcd 0000:00:02.3: irq 5, io mem 0xe6000000

&lt;5&gt;sd 0:0:0:0: Write Protect is off

&lt;7&gt;sd 0:0:0:0: Mode Sense: 00 3a 00 00

&lt;5&gt;sd 0:0:0:0: Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

&lt;6&gt; sda: sda1 sda2

&lt;6&gt;usb usb2: new device found, idVendor=0000, idProduct=0000

&lt;6&gt;usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1

&lt;6&gt;usb usb2: Product: OHCI Host Controller

&lt;6&gt;usb usb2: Manufacturer: Linux 2.6.22.19-0.4-default ohci_hcd

&lt;6&gt;usb usb2: SerialNumber: 0000:00:02.3

&lt;6&gt;usb usb2: configuration #1 chosen from 1 choice

&lt;6&gt;hub 2-0:1.0: USB hub found

&lt;6&gt;hub 2-0:1.0: 3 ports detected

&lt;5&gt;sd 0:0:0:0: Attached SCSI disk

&lt;5&gt;sd 0:0:1:0: 78165360 512-byte hardware sectors (40021 MB)

&lt;5&gt;sd 0:0:1:0: Write Protect is off

&lt;7&gt;sd 0:0:1:0: Mode Sense: 00 3a 00 00

&lt;5&gt;sd 0:0:1:0: Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

&lt;5&gt;sd 0:0:1:0: 78165360 512-byte hardware sectors (40021 MB)

&lt;5&gt;sd 0:0:1:0: Write Protect is off

&lt;7&gt;sd 0:0:1:0: Mode Sense: 00 3a 00 00

&lt;5&gt;sd 0:0:1:0: Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

&lt;6&gt; sdb: sdb1

&lt;5&gt;sd 0:0:1:0: Attached SCSI disk

&lt;4&gt;swsusp: Basic memory bitmaps created

&lt;4&gt;swsusp: Basic memory bitmaps freed

&lt;4&gt;Attempting manual resume

&lt;6&gt;kjournald starting.  Commit interval 5 seconds

&lt;6&gt;EXT3 FS on sda2, internal journal

&lt;6&gt;EXT3-fs: mounted filesystem with ordered data mode.

&lt;5&gt;sd 0:0:0:0: Attached scsi generic sg0 type 0

&lt;5&gt;sd 0:0:1:0: Attached scsi generic sg1 type 0

&lt;5&gt;scsi 1:0:0:0: Attached scsi generic sg2 type 5

&lt;6&gt;pci_hotplug: PCI Hot Plug PCI Core version: 0.5

&lt;6&gt;shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

&lt;4&gt;PCI: Enabling device 0000:00:0c.0 (0004 -&gt; 0005)

&lt;4&gt;ACPI: PCI Interrupt Link enabled at IRQ 11

&lt;7&gt;PCI: setting IRQ 11 as level-triggered

&lt;6&gt;ACPI: PCI Interrupt 0000:00:0c.0[A] -&gt; Link -&gt; GSI 11 (level, low) -&gt; IRQ 11

&lt;4&gt;3c59x: Donald Becker and others.

&lt;6&gt;0000:00:0c.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001a400.

&lt;6&gt;sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600

&lt;4&gt;ACPI: PCI Interrupt Link enabled at IRQ 10

&lt;7&gt;PCI: setting IRQ 10 as level-triggered

&lt;6&gt;ACPI: PCI Interrupt 0000:00:0a.0[A] -&gt; Link -&gt; GSI 10 (level, low) -&gt; IRQ 10

&lt;6&gt;rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0

&lt;4&gt;rtc_cmos: probe of 00:06 failed with error -16

&lt;4&gt;sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray

&lt;6&gt;Uniform CD-ROM driver Revision: 3.20

&lt;7&gt;sr 1:0:0:0: Attached scsi CD-ROM sr0

&lt;6&gt;Linux agpgart interface v0.102 (c) Dave Jones

&lt;6&gt;input: Power Button (FF) as /class/input/input3

&lt;6&gt;ACPI: Power Button (FF)

&lt;6&gt;input: Power Button (CM) as /class/input/input4

&lt;6&gt;ACPI: Power Button (CM)

&lt;6&gt;eth0 renamed to eth1

&lt;6&gt;udev: renamed network interface eth0 to eth1

&lt;6&gt;scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0

&lt;4&gt;        &lt;Adaptec 2940 SCSI adapter&gt;

&lt;4&gt;        aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs

&lt;4&gt;

&lt;5&gt;scsi 2:0:0:0: Sequential-Access SONY     SDT-5000         3.30 PQ: 0 ANSI: 2

&lt;6&gt; target2:0:0: Beginning Domain Validation

&lt;6&gt; target2:0:0: FAST-5 SCSI 5.0 MB/s ST (200 ns, offset 8)

&lt;6&gt; target2:0:0: Domain Validation skipping write tests

&lt;6&gt; target2:0:0: Ending Domain Validation

&lt;5&gt;scsi 2:0:0:0: Attached scsi generic sg3 type 1

&lt;6&gt;agpgart: Detected SiS chipset - id:1605

&lt;6&gt;agpgart: AGP aperture is 64M @ 0xe8000000

&lt;4&gt;PCI: Enabling device 0000:00:0b.0 (0004 -&gt; 0006)

&lt;4&gt;ACPI: PCI Interrupt Link enabled at IRQ 11

&lt;6&gt;ACPI: PCI Interrupt 0000:00:0b.0[A] -&gt; Link -&gt; GSI 11 (level, low) -&gt; IRQ 11

&lt;6&gt;osst :I: Tape driver with OnStream support version 0.99.4

&lt;4&gt;osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $

&lt;6&gt;st: Version 20070203, fixed bufsize 32768, s/g segs 256

&lt;5&gt;st 2:0:0:0: Attached scsi tape st0

&lt;6&gt;st 2:0:0:0: st0: try direct i/o: yes (alignment 512 B)

&lt;6&gt;gameport: CS46xx Gameport is pci0000:00:0b.0/gameport0, speed 1269kHz

&lt;6&gt;Adding 4200956k swap on /dev/sda1.  Priority:-1 extents:1 across:4200956k

&lt;6&gt;device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com

&lt;6&gt;loop: module loaded

&lt;6&gt;kjournald starting.  Commit interval 5 seconds

&lt;6&gt;EXT3 FS on sdb1, internal journal

&lt;6&gt;EXT3-fs: mounted filesystem with ordered data mode.

&lt;6&gt;AppArmor: AppArmor initialized

&lt;5&gt;audit(1252274596.401:2):  type=1505 info="AppArmor initialized" pid=1685

Kernel logging (ksyslog) stopped.

Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sun Sep  6 22:02:57 2009

Creating device nodes with udev

Trying manual resume from /dev/sda1

Invoking userspace resume from /dev/sda1

resume: Could not stat configuration file

resume: libgcrypt version: 1.2.4

Trying manual resume from /dev/sda1

Invoking in-kernel resume from /dev/sda1

Waiting for device /dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 to appear:  ok

fsck 1.40.2 (12-Jul-2007)

/sbin/fsck.ext3 (1) -- / fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2

/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2: Superblock last write time is in the future.  FIXED.

/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2: clean, 252614/14139392 files, 20525715/28254318 blocks

fsck succeeded. Mounting root device read-write.

Mounting root /dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2

Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Sep  6 18:03:02 2009

done

Starting udevd udevd-event[1492]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it

done

Loading required kernel modules

doneActivating swap-devices in /etc/fstab...

donemount: according to mtab, /dev/sda2 is already mounted on /

Activating device mapper...

done

Starting MD Raid unused

Checking file systems...

fsck 1.40.2 (12-Jul-2007)

/dev/disk/by-id/scsi-SATA_ST340810A_3FB0ELAW-part1: Superblock last write time is in the future.  FIXED.

/dev/disk/by-id/scsi-SATA_ST340810A_3FB0ELAW-part1: clean, 31/4889248 files, 3875650/9769520 blocks

donedone

Mounting local file systems...

proc on /proc type proc (rw)

sysfs on /sys type sysfs (rw)

debugfs on /sys/kernel/debug type debugfs (rw)

udev on /dev type tmpfs (rw)

devpts on /dev/pts type devpts (rw,mode=0620,gid=5)

/dev/sdb1 on /vmimages type ext3 (rw,acl,user_xattr)

doneMounting securityfs on /sys/kernel/security done

Loading AppArmor module done

Loading AppArmor profiles done

Creating /var/log/boot.msg

done&lt;notice&gt;killproc: kill(969,29)

Setting up the hardware clockdone

Setting up hostname 'suse103'done

Setting up loopback interface     lo

Activating remaining swap-devices in /etc/fstab...

done    lo        IP address: 127.0.0.1/8

Checking for network time protocol daemon (NTPD): unused

Can't determine current runlevel

done

Configuring serial ports...

/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A

Configured serial ports

doneSetting current sysctl status from /etc/sysctl.conf

net.ipv4.icmp_echo_ignore_broadcasts = 1

net.ipv4.conf.all.rp_filter = 1

fs.inotify.max_user_watches = 65536

done

Enabling syn flood protectiondone

Disabling IP forwardingdone

done

System Boot Control: The system has been set up

Skipped features: boot.md boot.cycle

System Boot Control: Running /etc/init.d/boot.local

done&lt;notice&gt;killproc: kill(969,3)

INIT:

Boot logging started on /dev/tty1(/dev/console) at Sun Sep  6 22:03:23 2009

Master Resource Control: previous runlevel: N, switching to runlevel: 5

Entering runlevel: 5

&lt;notice&gt;startproc: execve (/sbin/resmgrd) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/sbin/resmgrd

Starting D-Bus daemonUnknown username "gdm" in message bus configuration file

done

&lt;notice&gt;startproc: execve (/sbin/syslog-ng) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/sbin/syslog-ng

Starting resource managerdone

Starting acpid &lt;notice&gt;startproc: execve (/sbin/klogd) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/sbin/klogd

Starting syslog servicesdone

&lt;notice&gt;startproc: execve (/sbin/acpid) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/sbin/acpid

done

Starting ConsoleKit&lt;notice&gt;startproc: execve (/usr/sbin/console-kit-daemon) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon

done

Starting HAL daemon&lt;notice&gt;startproc: execve (/usr/sbin/hald) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/hald

done

Loading CPUFreq modules (CPUFreq not supported)

Starting service kdm&lt;notice&gt;startproc: execve (/opt/kde3/bin/kdm) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm

done

Loading keymap i386/qwerty/us.map.gz

done&lt;notice&gt;checkproc: /opt/kde3/bin/kdm 2204

Loading compose table latin1.adddone

Start Unicode mode

doneLoading console font lat9w-16.psfu  -m trivial G0:loadable

doneStarting the DHCP DBUS Daemon&lt;notice&gt;startproc: execve (/usr/sbin/dhcdbd) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd

done

Starting the NetworkManagerDispatcher&lt;notice&gt;startproc: execve (/usr/sbin/NetworkManagerDispatcher) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher

done

Starting the NetworkManager&lt;notice&gt;startproc: execve (/usr/sbin/NetworkManager) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager

done

&lt;notice&gt;checkproc: /opt/kde3/bin/kdm 2204

Starting auditd &lt;notice&gt;startproc: execve (/sbin/auditd) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/sbin/auditd

done

Starting irqbalance unused

Checking/updating CPU microcode done

Starting service MySQL done

Try to get initial date and time via NTP from north-america.pool.ntp.orgError : Temporary failure in name resolution

failed

Starting network time protocol daemon (NTPD)&lt;notice&gt;startproc: execve (/usr/sbin/ntpd) http:// /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/ntpd

done

Starting Name Service Cache Daemon&lt;notice&gt;startproc: execve (/usr/sbin/nscd) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/nscd

done

Starting RPC portmap daemon&lt;notice&gt;startproc: execve (/sbin/portmap) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/sbin/portmap

done

Starting cupsd&lt;notice&gt;startproc: execve (/usr/sbin/cupsd) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd

done

Starting mail service (Postfix)done

Starting httpd2 (worker) &lt;notice&gt;startproc: execve (/usr/sbin/httpd2-worker) http:// /usr/sbin/httpd2-worker -f /etc/apache2/httpd.conf , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 get_module_list_done=true LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 get_includes_done=true PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/var/lib/apache2 SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-worker

&lt;notice&gt;checkproc: /usr/sbin/ntpd 2713

&lt;notice&gt;killproc: kill(2713,15)

&lt;notice&gt;startproc: execve (/usr/sbin/cron) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/cron

Starting CRON daemondone

Initializing random number generatordone

&lt;notice&gt;startproc: execve (/usr/sbin/powersaved) http:// /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 , HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved

&lt;notice&gt;startproc: execve (/usr/sbin/smartd) , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/smartd

Starting powersaved: done

Starting smartd done

done

Starting SSH daemon&lt;notice&gt;startproc: execve (/usr/sbin/sshd) http:// /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid , CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1200BB-00WD-WMA8C1305861-part2 _=/sbin/startproc DAEMON=/usr/sbin/sshd

done

done

Master Resource Control: runlevel 5 has been reached

Skipped services in runlevel 5: irq_balancer

&lt;notice&gt;killproc: kill(1962,3)

Process Info

root     20586 19962  0 11:31 pts/1    00:00:00 grep vmware

root     28090     1  0 Sep19 ?        00:00:00 /usr/bin/vmnet-dhcpd -cf /etc/vmware/vmnet1/dhcpd/dhcpd.conf -lf /etc/vmware/vmnet1/dhcpd/dhcpd.leases -pf /var/run/vmnet-dhcpd-vmnet1.pid vmnet1

root     28107     1  0 Sep19 ?        00:00:00 /usr/bin/vmnet-dhcpd -cf /etc/vmware/vmnet8/dhcpd/dhcpd.conf -lf /etc/vmware/vmnet8/dhcpd/dhcpd.leases -pf /var/run/vmnet-dhcpd-vmnet8.pid vmnet8

root     28112     1  0 Sep19 ?        00:00:00 /usr/bin/vmnet-natd -d /var/run/vmnet-natd-8.pid -m /var/run/vmnet-natd-8.mac -c /etc/vmware/vmnet8/nat/nat.conf

root     28378     1  0 Sep19 ?        00:00:00 /bin/sh /usr/bin/vmware-watchdog -s webAccess -u 30 -q 5 /usr/lib/vmware/webAccess/java/jre1.5.0_15/bin/webAccess -client -Xmx64m -XX:MinHeapFreeRatio=30 -XX:MaxHeapFreeRatio=30 -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.endorsed.dirs=/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/common/endorsed -classpath /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/bin/bootstrap.jar:/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/bin/commons-logging-api.jar -Dcatalina.base=/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16 -Dcatalina.home=/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16 -Djava.io.tmpdir=/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/temp org.apache.catalina.startup.Bootstrap start

root     28386 28378  0 Sep19 ?        00:07:28 /usr/lib/vmware/webAccess/java/jre1.5.0_15/bin/webAccess -client -Xmx64m -XX:MinHeapFreeRatio=30 -XX:MaxHeapFreeRatio=30 -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.endorsed.dirs=/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/common/endorsed -classpath /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/bin/bootstrap.jar:/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/bin/commons-logging-api.jar -Dcatalina.base=/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16 -Dcatalina.home=/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16 -Djava.io.tmpdir=/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/temp org.apache.catalina.startup.Bootstrap start

root     28388     1  0 Sep19 ?        00:00:01 /usr/sbin/vmware-authdlauncher

root     28490     1  0 Sep19 ?        00:05:08 /usr/lib/vmware/bin/vmware-hostd -a -d -u /etc/vmware/hostd/config.xml

root     28633     1 12 Sep19 ?        11:49:15 /usr/lib/vmware/bin/vmware-vmx -# product=2;name=VMware Server;version=2.0.1;buildnumber=156745;licensename=VMware GSX Server for Linux;licenseversion=3.0 build-156745; -@ pipe=/tmp/vmhsdaemon-0/vmxc243ecd62a4b8c66;readyEvent=49 /vmimages/Windows XP Professional/Windows XP Professional.vmx

jmusial  28646     1  0 Sep19 ?        00:01:33 /home/jmusial/.mozilla/firefox/ylfaek02.default/extensions/VMwareVMRC@vmware.com/plugins/bin/vmware-vmrc -h localhost:8333 -p                                      -M 16

jmusial  29198     1  1 Sep19 ?        01:20:42 /home/jmusial/.mozilla/firefox/ylfaek02.default/extensions/VMwareVMRC@vmware.com/plugins/bin/vmware-remotemks -@ vmdbPipeHandle=141; vm=_16; gui=true -H 145 -R -I -P 2 -# product=8;name=VMware Remote Console Plug-in;version=2.5.0;buildnumber=122581;licensename=VMware Player;licenseversion=6.0 build-122581; -s libdir=/home/jmusial/.mozilla/firefox/ylfaek02.default/extensions/VMwareVMRC@vmware.com/plugins/bin/..

hi every one! just installed vmserver 2 and an ubuntu 8.04 server as a vm machine...

everything looks good except my keyboard...when i try to use it,some keys dont work...

is there something that i can do to fix it? i need too much keyboard in the server environment...

please,anyone?

Hoping someone can shed some light as to why, having installed VMWare Server on a host running Vista 64-bit Business, that the following all show up as 32-bit processes in Task Manager:

VMNat.exe

VMNetDCHP.exe

VMWare-AuthD.exe

WMWare-HostD.exe

The only VM* named process that is 64-bit appears to be VMWare-VMX.exe.

Thanks in advance,

David

I'm trying to get VMware Server v2.0.1 running on a new machine - Atom 330 CPU, Windows Embedded for Point of Service. (Basically, Windows XP SP3.)

I successfully used VMware Server v2.0.1 on a Celeron CPU with Windows XP Embedded (Windows XP SP2.) The exact VM I'm trying to use now works on that older computer running in VMware Player.

When I try to launch a VM, the resulting hostd log file contains:

Task Created : haTask-64-vim.VirtualMachine.powerOn-7471212

RecordOp ADD: recentTask, 64

RecordOp ADD: recentTask, ha-taskmgr

Event 2 : Intelio Edge Template on host sserv in ha-datacenter is starting

RecordOp ASSIGN: latestEvent, ha-eventmgr

2009-11-17 16:33:56.945 'vm:C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx' 3564 info State Transition (VM_STATE_OFF -&gt; VM_STATE_POWERING_ON)

RecordOp ASSIGN: disabledMethod, 64

Vimsvc::HaLicenseSourceImpl::CheckLicenses: skipped on this platform

RecordOp ASSIGN: info, haTask-64-vim.VirtualMachine.powerOn-7471212

VMHSVMCbPower: Setting state of VM /vm/#65d8f85c9eaf2cb6/ to powerOn with option soft

VMHSVMExecVMX: the VMX process terminated prematurely

VMHSLaunchVM failed: Failed to launch peer process

RecordOp ASSIGN: info, haTask-64-vim.VirtualMachine.powerOn-7471212

RecordOp ASSIGN: info, haTask-64-vim.VirtualMachine.powerOn-7471212

RecordOp ASSIGN: info, haTask-64-vim.VirtualMachine.powerOn-7471212

RecordOp ASSIGN: info, haTask-64-vim.VirtualMachine.powerOn-7471212

CnxAuthdConnect: Returning false because CnxAuthdConnectPipe failed

CnxConnectAuthd: Returning false because CnxAuthdConnect failed

Cnx_Connect: Returning false because CnxConnectAuthd failed

Cnx_Connect: Error message: Failed to read vmware-authd port number: Cannot connect to VMX: C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx

CnxAuthdConnect: Returning false because CnxAuthdConnectPipe failed

CnxConnectAuthd: Returning false because CnxAuthdConnect failed

Cnx_Connect: Returning false because CnxConnectAuthd failed

Cnx_Connect: Error message: Failed to read vmware-authd port number: Cannot connect to VMX: C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx

CnxAuthdConnect: Returning false because CnxAuthdConnectPipe failed

CnxConnectAuthd: Returning false because CnxAuthdConnect failed

Cnx_Connect: Returning false because CnxConnectAuthd failed

Cnx_Connect: Error message: Failed to read vmware-authd port number: Cannot connect to VMX: C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx

CnxAuthdConnect: Returning false because CnxAuthdConnectPipe failed

CnxConnectAuthd: Returning false because CnxAuthdConnect failed

Cnx_Connect: Returning false because CnxConnectAuthd failed

Cnx_Connect: Error message: Failed to read vmware-authd port number: Cannot connect to VMX: C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx

CnxAuthdConnect: Returning false because CnxAuthdConnectPipe failed

CnxConnectAuthd: Returning false because CnxAuthdConnect failed

Cnx_Connect: Returning false because CnxConnectAuthd failed

Cnx_Connect: Error message: Failed to read vmware-authd port number: Cannot connect to VMX: C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx

CnxAuthdConnect: Returning false because CnxAuthdConnectPipe failed

CnxConnectAuthd: Returning false because CnxAuthdConnect failed

Cnx_Connect: Returning false because CnxConnectAuthd failed

Cnx_Connect: Error message: Failed to read vmware-authd port number: Cannot connect to VMX: C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx

CnxAuthdConnect: Returning false because CnxAuthdConnectPipe failed

CnxConnectAuthd: Returning false because CnxAuthdConnect failed

Cnx_Connect: Returning false because CnxConnectAuthd failed

Cnx_Connect: Error message: Failed to read vmware-authd port number: Cannot connect to VMX: C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx

CnxAuthdConnect: Returning false because CnxAuthdConnectPipe failed

CnxConnectAuthd: Returning false because CnxAuthdConnect failed

Cnx_Connect: Returning false because CnxConnectAuthd failed

Cnx_Connect: Error message: Failed to read vmware-authd port number: Cannot connect to VMX: C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx

Failed to do Power Op: Error: (3008) Cannot connect to the virtual machine

2009-11-17 16:35:28.451 'vm:C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx' 2992 warning Failed operation

Event 3 : Failed to power on Intelio Edge Template on sserv in ha-datacenter: A general system error occurred:

RecordOp ASSIGN: latestEvent, ha-eventmgr

2009-11-17 16:35:28.451 'vm:C:\Intelio\vm\edgeA\Intelio-Edge-rev3.vmx' 2992 info State Transition (VM_STATE_POWERING_ON -&gt; VM_STATE_OFF)

RecordOp ASSIGN: disabledMethod, 64

Task Completed : haTask-64-vim.VirtualMachine.powerOn-7471212

There's no vmware.log file in the VM's directory. I have uninstalled VMware Server, cleaned up all left behind files, rebooted, reinstall, reconfigure, reboot, and the same thing still happens.

I'm at a loss on what else to try or how to diagnose the problem. The log offers nodetail about why the VM process fails.

The basic situation that I have is a dedicated server running CentOS 5.4  At the moment I have one VM running Ubuntu 9.0.4. Later on, I will want to add another VM running Windows Server 2003 but at the moment I am focusing on getting Ubuntu up and running.

The Ubuntu installation is working fine but I'm seriously struggling to get port forwarding working so that I can access websites to be hosted on the Ubuntu VM. As a newbie to Linux, I am confused about the relationship between IPTables and VMWare's own port forwarding.

Here's what I've tried so far.

The IP of my server is xxx.xxx.xxx.xxx and the provider support have told me that the subnet mask is 255.255.255.0, the gateway address is xxx.xxx.xxx.1 and the network address is xxx.xxx.xxx.0. (Those latter two surprise me a bit, I expected private gateway/network address rather than public ones.)

First of all I tried Bridged Networking but had no success at all in communicating with the machine other than through the VMware console. I tried pinging it from the host (using ssh into the host) but no joy; also no Inernet access from the VM. I changed the interfaces configuration from DHCP to Static, using a static address of 192.168.1.100 and setting the gateway to xxx.xxx.xxx.1 as advised by the provider. No real difference, still cannot ping the guest from the host or vice versa and no Internet access from the guest.

Then I tried NAT. The host automatically set the IP address to 192.168.132.128 with a gateway of 192.168.132.2 Now the guest has Internet access out and when I do a VNC to the host and open Firefox with 192.168.132.128 I can see the hosted website okay but I still cannot get into it from outside.

I mentioned that I'm a bit confused about IPtables and VMware port forwarding, what I meant is that I'm not sure whether IPtable forwarding should be set to the IP address of the guest interface (192.168.132.128 in this case) or the gateway address 192.168.132.2 .

I have a feeling that I'm missing something very simple here, can anybody tell me what it is?

There are seversl posts on problems installing VMware server on Windows 7. 

I have been trying to do it, but I am not able to get the guest operating system to boot.

I would like to get a definative answer as to whether or not Windows Server is compatable with a Windows 7 host.

I have been trying to install a  Windows 2000 Guest.

Thanks

Bill Bos 

I have VMWare Server installed on an HP ML350 G5 running Windows 2008 Server Enterprise 64-bit, with  28GB RAM and two 2.33Ghz Xeon processors.  This server is also the active domain controller, running DNS and DHCP roles.  Since the installation of VMWare, we have noticed intermittent network connection issues in which the host server and virtual servers will momentarily stop responding (a few seconds), and then return to working normally.  This is easily exemplified by running a ping -t against the host or vmware machines and notice that approximately every 5 - 10 minutes the ping will time out for a couple of requests, then return correctly.

Thinking the issue may be with the NIC, I updated all drivers and also introduced another NIC to the host machine and moved the VMWare machines to this new card.  I then noticed that traffic destined for the host on the original NIC (that no longer has traffic for VMWare), does not drop any ping requests.  But the second NIC, with VMWare, has the same problem with dropping the connection.  So the issue appears to only appear with VMWare utilizing the NIC.

I have run out of ideas to identify what is causing this problem and/or how to correct it.  This installation is in a production environment, so any help would be greatly appreciated.

Thanks!

I am running VMware ServerVersion 2.0.2Build 203138 on Windows 7 Enterprise - 64 bit with 5GB of Ram and an Intel Core 2 - 6600@2.4GHz.  Have 2 32 bit vm's (xp pro and win 7 ultimate) running just fine, tried to added new 64-bit xp vm and get the following error.

"Attempting to load a x64 operating system, however this CPU is not compatible with x64 mode.  Please install a 32-bit X86 operating system."

Hi,

Something pretty strange happened to us today. In order to migrate from VMWARE SERVER 2 to ESXi when needed to convert from growable virtual disks split in 2gb files to a single file. We used vmware-vdiskmanager -r source.vmdk -t 0 destination.vmdk. All the convertions went OK.

Once we start a virtual machine, we noticed some data missing. In fact, the content of the virtual mas 4 month old. We converted 10 virtual machines and that happened to us in 4 of them (2 on each server).

In order to reproduce the error, I copy  vmdk from a backup  to the server. I checked for current data and it was OK. I convert the disk but I keept the original. Once again the data was missing. I delete the disks, created new one and pointed to the OLD non-converted disks. The data was ALSO missing.

This was like the disk was not having the data writed to it or something like that. In the other hand, could this be a major bug in the conversion process? (not likely).

Any ideas what went wrong?

Regards

Hernán.

Edited all caps subject line according to the forum rules,  AWo.

Hello,

I get this message

msg.vmxaiomgr.retrycontabort.rudeunplug:Operation on file "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" failed.

...

The last thing I have done in this VM was installing Microsoft updates.

Has anybody any idea ?

  Hendrik

except from log

Jan 19 15:21:18.212: vmx| VMXAIOMGR: Retry on write "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : Unknown error 665 (0x299).
Jan 19 15:21:18.212: vmx| VMXAIOMGR: system : err=170242 errCode=665 freeSpace=213551165440
Jan 19 15:21:18.212: vmx| VMXAIOMGR: "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : write s=49279991808 n=65536 ne=2
Jan 19 15:21:18.212: vmx| VMXAIOMGR:             v[0]=30F14200:3584
Jan 19 15:21:18.212: vmx| VMXAIOMGR:             v[1]=22AC000:61952
Jan 19 15:21:18.213: vmx| VMXAIOMGR: Retry on write "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : Unknown error 665 (0x299).
Jan 19 15:21:18.213: vmx| VMXAIOMGR: system : err=170242 errCode=665 freeSpace=213551099904
Jan 19 15:21:18.213: vmx| VMXAIOMGR: "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : write s=49279991808 n=65536 ne=2
Jan 19 15:21:18.213: vmx| VMXAIOMGR:             v[0]=30F14200:3584
Jan 19 15:21:18.213: vmx| VMXAIOMGR:             v[1]=22AC000:61952
Jan 19 15:21:18.213: vmx| VMXAIOMGR: Retry on write "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : Unknown error 665 (0x299).
Jan 19 15:21:18.213: vmx| VMXAIOMGR: system : err=170242 errCode=665 freeSpace=213551099904
Jan 19 15:21:18.213: vmx| VMXAIOMGR: "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : write s=49279991808 n=65536 ne=2
Jan 19 15:21:18.213: vmx| VMXAIOMGR:             v[0]=30F14200:3584
Jan 19 15:21:18.213: vmx| VMXAIOMGR:             v[1]=22AC000:61952
Jan 19 15:21:18.214: vmx| VMXAIOMGR: Retry on write "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : Unknown error 665 (0x299).
Jan 19 15:21:18.214: vmx| VMXAIOMGR: system : err=170242 errCode=665 freeSpace=213551099904
Jan 19 15:21:18.214: vmx| VMXAIOMGR: "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : write s=49279991808 n=65536 ne=2
Jan 19 15:21:18.214: vmx| VMXAIOMGR:             v[0]=30F14200:3584
Jan 19 15:21:18.214: vmx| VMXAIOMGR:             v[1]=22AC000:61952
Jan 19 15:21:18.214: vmx| VMXAIOMGR: Retry on write "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : Unknown error 665 (0x299).
Jan 19 15:21:18.214: vmx| VMXAIOMGR: system : err=170242 errCode=665 freeSpace=213551099904
Jan 19 15:21:18.214: vmx| VMXAIOMGR: "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : write s=49279991808 n=65536 ne=2
Jan 19 15:21:18.214: vmx| VMXAIOMGR:             v[0]=30F14200:3584
Jan 19 15:21:18.215: vmx| VMXAIOMGR:             v[1]=22AC000:61952
Jan 19 15:21:18.215: vmx| VMXAIOMGR: Retry on write "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : Unknown error 665 (0x299).
Jan 19 15:21:18.215: vmx| VMXAIOMGR: system : err=170242 errCode=665 freeSpace=213551099904
Jan 19 15:21:18.215: vmx| VMXAIOMGR: "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" : write s=49279991808 n=65536 ne=2
Jan 19 15:21:18.215: vmx| VMXAIOMGR:             v[0]=30F14200:3584
Jan 19 15:21:18.215: vmx| VMXAIOMGR:             v[1]=22AC000:61952
Jan 19 15:21:18.215: vmx| Msg_Question:
Jan 19 15:21:18.215: vmx| [msg.vmxaiomgr.retrycontabort.rudeunplug] Operation on file "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" failed.
Jan 19 15:21:18.215: vmx| If the file resides on a remote file system, please make sure your network connection and the server where this disk resides are functioning properly. If the file resides on removable media, reattach the media.
Jan 19 15:21:18.215: vmx| Choose Retry to attempt the operation again.
Jan 19 15:21:18.215: vmx| Choose Abort to terminate this session.
Jan 19 15:21:18.215: vmx| Choose Continue to forward the error to the guest operating system.----------------------------------------
Jan 19 15:22:18.946: vmx| Msg_Question: msg.vmxaiomgr.retrycontabort.rudeunplug reply=1
Jan 19 15:22:18.946: vmx| Msg_Post: Warning
Jan 19 15:22:18.946: vmx| [msg.vmxaiomgr.corrupted] VMware Server cannot sync with disk before abort. Disk D:\Virtual_Machines\Arbeit\Arbeit.vmdk may be inconsistent.
Jan 19 15:22:18.946: vmx| ----------------------------------------
Jan 19 15:22:18.964: vmx| User requested abort: Exiting because of failed disk operation.
Jan 19 15:22:18.964: vmx| Win32 object usage: GDI 4, USER 5
Jan 19 15:22:18.964: vmx| CoreDump_CoreDump: faking exception to get context

Dear all,

Thanks for taking the time.  New to the forum and to VMs.  I have read up as much as I can before posting but are not 100% sure of the answer to my question.  I know with old Intel processors, hyperthreading is recommended to be disabled.  On ESX with newer intels (nehalem and newer), the best practise recommends hyperthreading to be enabled.

However, this question is for the free VMware server, which only allows 2 vCPUs per VM.  My quad core xeon 3460 is showing 8 logical CPUs in task manager under windows 2003 R2.  This makes sense since it is 4 cores x 2 hyperthreads = 8 logical CPUs.  So now, if I run a VM and assigned 2 vCPUs to it, am I just using 1 physical core since hypertheading is enabled?  In other words, the 2 hyperthreads in 1 core counts as 2 logical cpus, which are then assigned as 2 vCPUs to the VM.  Is this how I should look at it?

On the other hand, if I disable hyperthreading, then the host will simply has 4 cores (translate to 4 logical cpus since no HT).  Then if I assign 2 vCPU to the same VM, would the VM be using 2 physical cores now?  Would this be more efficient ?

Recap:

option 1) Quad core, HT enabled = 8 logical CPUs.  Assign 2 to a single VM.  Using only 1 core physically.

option 2) Quad core, HT disabled = 4 logical CPUs.  Assign 2 to a single VM. Using 2 cores physically.

Which will give faster performance on the VM?  I am thinking option 2 since the VM will be using 2 cores physically, instead of 2 HTs on a single core in option 1.  Or am I just not looking at this properly?

Thank you again for your time.  Please shine some light to a newbie question.

Hi,

after a power failure, we have this issue on our vmware server..

We have installed 7 virtual machines, only 2 of them are now recognized and running.

for the other 5, we get an "configuration file cannot be found" error, and they are shown as

"Unknown (Inaccessible)"

"Unknown 1 (Inaccessible)"

"Unknown 2 (Inaccessible)"

"Unknown 3 (Inaccessible)"

"Unknown 4 (Inaccessible)"

instead of their proper names ...

Any suggestions ?

Hi,

I'm running Workstation 7.1.0 build 261024 on my Windows 7 machine. On startup I'm invited to upgrade to v7.1.4. However every time I do that I get no further than a "download pending... (2%)" message.

It seems odd that the message says "Downloading VMware Tools for Linux".

Has anybody else experienced this and do you have a solution? Many thanks.

UBUNTU 10.10

Linux Kernel 2.6.35-31-generic-pae

Always used standard vmtools not open-vm-tools.

We have several ubuntu linux servers that are not upgrading properly after the last ESXi updates to the hosts prompted a new tools version. They worked fine with 8.3.7, but now when the installers run I get a GRUB error on reboot and the GUI is all scrambled. Some of the users need the GUI so that is why it is needed. Do you think this is a problem with initrd after tools compiles it?

I built a new server using the 10.10 iso image and did the new tools install [this new server never had the older version of tools on it - so this may be why it works] and it worked with the gui installed. Can anyone give advice as to why existing servers can't upgrade? 

I have attached a photo of the GRUB error on reboot.

I have attached a photo of the GUI all squiggly -- probably because xorg is not working right.

I've tried uninstalling gnome-common, gnome-utils, gdm, ubuntu-desktop and fluxbox. When re-installed it results in the same squiggly gui.

Also during the vmtools install, Xorg complains about not being able to find vmwlegacy_drv.so, even when it is in the /usr/lib/xorg/modules/drivers folder.

I am running out of things to try. Does anyone have suggestions?

Hi all

Can anybody can help me with Windows 2012 64bit installation on the VMware ServerVersion 2.0.2Build 203138?

I'm trying to install Windows 2012 from ISO image called: 9200.16384.WIN8_RTM.120725-1247_X64FRE_SERVER_EVAL_EN-US-HRM_SSS_X64FREE_EN-US_DV5.ISO downloaded from MS

Installation begins but Windows 2012 hangs after few seconds with something like blue screen and

information: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

I searched web for solution but it is hard to find proper solution in this case.

Thanks in advance

--

Artur Dębski

http://blogit.one.pl

http://www.amt.pl

I'm stuck since 2 days trying to have my Graphic card working in a Vmware host.

Specifications:

- Vvmware ESXi 5.0.0 running on Windows

- Ubuntu 10.04 running on host

- Graphic card: AMD Radeon 6900 Series

- Everything in 64 bits

Useful output :

   #lspci -v

    03:00.0 VGA compatible controller: ATI Technologies Inc Cayman PRO [AMD Radeon 6900 Series]

    Subsystem: PC Partner Limited Device 186b

    Flags: bus master, fast devsel, latency 64, IRQ 18

    Memory at c0000000 (64-bit, prefetchable) [size=256M]

    Memory at b2420000 (64-bit, non-prefetchable) [size=128K]

    I/O ports at 4400 [size=256]

    Capabilities: [50] Power Management version 3

    Capabilities: [58] Express Endpoint, MSI 00

    Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

    Capabilities: [100] Vendor Specific Information <?>

    Capabilities: [150] Advanced Error Reporting <?>

    Kernel driver in use: fglrx_pci

    Kernel modules: fglrx

I'm starting my ubuntu in text mode.

I try to have OpenCL running in my VM. I tried a lot of various tutorials with ati-stream and so on and nothing works.

Then I followed [This][1]

After I did it I got this message at startup:

       dmesg|grep radeon

         [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.6  root=UUID=1b5bd568-6b7f-41c0-be1c-d69ae4f7e438 ro text splash  video=radeon:modeset=1

    [    0.000000]  Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.6  root=UUID=1b5bd568-6b7f-41c0-be1c-d69ae4f7e438 ro text splash  video=radeon:modeset=1

    [    2.670567] [drm] radeon kernel modesetting enabled.

    [    2.671623] radeon 0000:03:00.0: enabling device (0000 -> 0003)

    [    2.672877] radeon 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

    [    2.679567] radeon 0000:03:00.0: BAR 6: can't assign [??? 0x00000000 flags 0x0] (bogus alignment)

    [    2.680456] radeon 0000:03:00.0: BAR 6: can't assign [??? 0x00000000 flags 0x0] (bogus alignment)

    [    2.681299] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM

    [    2.682179] radeon 0000:03:00.0: Fatal error during GPU init

    [    2.683291] [drm] radeon: finishing device.

    [    2.693101] radeon 0000:03:00.0: PCI INT A disabled

    [    2.696322] radeon: probe of 0000:03:00.0 failed with error -22

So, I know that the passthrough is working since I can see my graphic card in my host but I can't make it work right.

Can anyone help me? Ask me if you need more information!

  [1]: http://www.backtrack-linux.org/forums/showthread.php?t=40213&page=2